Smiling children gathered around a table at a daycare

Daycares

Most of what a licensor asks about is already on your wall. Water is the one that sends people hunting through a drawer. It does not have to: it is a test, a certificate and a date.

Why us

Why programs call us

Ready for your license renewal

The water evidence is the program’s job, not the landlord’s. We run the tests EEC licensors commonly request under 606 CMR 7.07 and give you a dated lab report for the licensing file; each licensor has discretion on the exact paperwork.

Numbers an inspector accepts

Every reading printed beside the standard it is measured against, dated and in a format you can hand over without explaining it.

Sized to the site, not the catalog

Fixture count, peak draw and the equipment you actually run decide the system, not the square footage or the number of bathrooms.

Evidence for the licensing file, without the scramble

Every drinking fixture sampled, two draws each, dated. Where a reading comes back high we fix it at the fixture, so the record you hand over says found and closed.

Fitted around trading hours

Early, late or on a closed day. The people who fit it are the people who come back to service it.

What the system is

How it is put together

We test every tap and fountain the children drink from before we fit anything. Then we put lead-reducing filters where the results say they are needed, and run the fill stations through them. You end up with water that has actually been checked, and a dated record that goes straight into your licensing file.

Pick a stage to see what it does

THE MAINTHE TAP1Sediment pre-filter2Lead reduction3Filtered bottle fillerTHE MAINTHE TAP1Sediment pre-filter2Lead reduction3Filtered bottle filler

Tap a stage to see what it does

  1. THE MAIN
  2. Protects the stages behind it and is the first thing replaced on a service visit.

  3. Certified under NSF/ANSI 53 for lead reduction, fitted at the fixtures children actually drink from rather than at the main. Current cert numbers for your specific install land on your installation record.

  4. One fixture per room where the sampling says it is needed, with the filter change on our calendar and not yours.

  5. THE TAP

Sediment pre-filter

Protects the stages behind it and is the first thing replaced on a service visit.

Lead-reduction filtration

Certified under NSF/ANSI 53 for lead reduction, fitted at the fixtures children actually drink from rather than at the main. Current cert numbers for your specific install land on your installation record.

Filtered bottle filler

One fixture per room where the sampling says it is needed, with the filter change on our calendar and not yours.

Pricing

What it costs

All three on one agreement over twenty-four months: $88 – $204 a month.

Measure

Test & recommend the system

Freethe water test; lead is quoted separately
$13 – $21a month, inside the combined agreement
  • Lead at the fixtures children actually drink from, first draw
  • Testing on a private well against DEP standards, beyond the free test
  • Bacteria, nitrate and pH where the source is a well
  • A plain recommendation: what this water needs, and what it does not
  • The assessment is free, and yours to take elsewhere

Free covers hardness, iron, TDS, pH and manganese. Lead is a separate analysis: MassDEP’s assistance program covers one round free at schools and childcares that have not used it, and after that it is about $30 a sample, two samples a fixture. Testing for a wider set of substances runs $250 to $650 and is quoted before we run it.

Most sites

Solve

Fit & commission

$1,300 – $2,900per filtered station, installed
$67 – $150a month over twenty-four months
  • Point-of-use filtration at drinking fountains and kitchen taps
  • Certified fixtures, so the lead you removed does not come back
  • Point-of-entry treatment where the well needs it
  • A system engineered for the site, sized and sequenced from your readings
  • Permit pulled and fitted by a licensed plumber
  • Commissioned under real flow before we leave

undefined

Protect

Service & compliance

$100 – $400a year
$8 – $33a month, spread across the year
  • We keep the calendar, so renewal is not a scramble
  • An annual re-test aligned to your license cycle
  • Filter changes carried out and dated
  • Backflow devices tested on the Massachusetts cycle by a MassDEP-certified tester: reduced-pressure zone twice a year, double check annually (310 CMR 22.22, as of November 2026)
  • A dated record after every visit, for the file an inspector asks for

Cartridges annually, and a re-sample every three years. You may spread that over a third of the taps a year.

Your price is confirmed after the test and assessment. Nothing here is a quote. We survey the premises, read the water, and give you an itemized fixed price in writing before any work starts. Ranges are illustrative, from published 2026 commercial cost data. Monthly is one commercial agreement over up to twenty-four months, fees from 1% a month, subject to credit approval; service is the annual figure spread across the year.Ranges are illustrative, from 2026 commercial cost data. Monthly is one agreement over up to 24 months, subject to credit approval.

Questions

What people ask us

What water testing does a Massachusetts daycare need?

Licensing under 606 CMR 7.07 asks you to show your water is safe to drink. We run the lead and well-water tests EEC licensors commonly request under that reg and give you a dated lab report in your licensing file. Each licensor has discretion over the exact documentation accepted; we match their checklist before we sample. The water test is free; lead analysis is separate, and a first round of it is often free under the MassDEP program.

Is lead testing free for childcare programs?

MassDEP’s assistance program covers one round of lead analysis for schools and childcares that have not used it. After that it is about $30 a sample, with two samples per fixture.

How often should a daycare retest its water?

Filter cartridges are changed every year, and lead is re-sampled every three years; you can spread that across a third of the taps each year. On a private well we also test bacteria, nitrate and pH each year.

How much do filtered drinking stations cost?

$1,300 to $2,900 per filtered station, installed, with certified fixtures so the lead you removed does not come back. Upkeep runs $100 to $400 a year.

Our daycare is on a private well. What changes?

The well needs testing against MassDEP drinking water standards, which goes beyond the free test into bacteria, nitrate and lead, and point-of-entry treatment where the readings call for it. We keep the calendar so your license renewal is never a scramble.

Need a hand? Reach out.

Contact us →

Where we work

Boston down to the Cape and the Islands

70 towns across the South Shore, the South Coast, Cape Cod and the Islands. Just outside the area? Ask anyway.

Working on your requestThank you

Sending your request. This takes a moment.

We read every request. You’ll hear back from us, usually the same working day.

The Lab

Town water reports

Every substance on the public record for that town, each one beside the limit it is measured against, with the document it came from.